VP DH ProComp Hex Spacers (2ea.)

These hubs only fit the DH ProComp I and II. Measuring from the outside from wheel to wheel, the following spacers will achieve certain track widths when bolted to the DH ProComp or ProComp II Wheel set. Measurements are in inches. these are sold in sets(2pcs.)

DH ProComp I wheel dimensions for track width using the follow hub size.

RC 4WD Bully Axle
• 335= 9.07
• 460= 9.32
• 585= 9.57


Losi LCC Axle
• 335= 9.07
• 460= 9.32
• 585= 9.57


Axial XR-10
• 335= front n/a / Rear 9.57
• 460= front 10.62 / Rear 9.82
• 585= front 10.87 / Rear 10.07


Berg OCM Axle
• 335= 10.00
• 460= 10.25
• 585= 10.5


Axial AX-10 Axle
• 335= 9.25
• 460= 9.50
• 585= 9.75


Kyosho Rockforce Axle
• 335RF= 10.00


DH ProComp II wheel dimensions for track width using the follow hub size.

RC 4WD Bully Axle
• 335= wont fit
• 460= 8.65
• 585= 8.90


Losi LCC
• 335= 8.37 rear only, modification needed
• 460= 8.62 front and rear, modification needed
• 585= 8.87
• need to file small area that may rub slightly.


Axial XR-10 Axle
• 335= front n/a / Rear 8.90
• 460= front 9.95 / Rear 9.15
• 585= front 10.2 / Rear 9.40


Berg OCM Axle
• 335= N/A
• 460= 9.58 with VP knuckles or straight lockout on rear
• 585= 9.83


Axial AX-10 Axle
• 335= 8.37 rear only
• 460= 8.62
• 585= 8.87