Sorry but this item is currently unavailable.
Please check back at a later stage.
Vanquish Ultra Heavy Duty Rebuildable Universal-style axle shaft for any AR60 axle
*5mm stub shaft requires the use of an 8mm driver to tighten the included lock nut. Many 8mm drivers have too large of an outside diameter to fit into many wheels. A compatible modified 8mm driver is available on our site (VPS07100).
**May require slight grinding of screws that hold lower link mounts.
*** You will need to provide a hex cross pin for use with these axles (Axial Part AX30163)
Universal style axles will have a chattering effect at high angles, this is normal with almost all universal style designs.
Posted by Jared on 13th Mar 2017
Only thing I'd suggest is black oxide coating the spool so it won't rust.
Posted by Nate Thompson on 4th Jan 2017
Love the added strength, rebuildable parts, and fit/finish.
*Should be noted that you'll want to clearance the inside of the C-Hubs for clearance of these universals. Using the Wraith Scale knuckles, with any steering deflection there is enough play to contact the top and bottom of the C-Hub.
Posted by Brian on 21st Nov 2016
If you want the absolute strongest drop in front driveshafts available, look no further. These are also rebuildable so you can service them whenever you need to keep things nice and smooth instead of having to replace the entire set. They have a tremendous amount of steering angle right out of the package as well. Much more than my Wraith can even use. I installed these VXDs into a brand new Vanquish V2 OCP axle housing and everything assembled without issue and the axle spins smooth as silk. With clamping scale hubs and knuckles, this is a bulletproof axle.