Sorry but this item is currently unavailable.
Please check back at a later stage.
The VS4-10 Chassis is built to provide a scale platform that doesn't hold back on performance. The chassis arches provide plenty of room for ride height adjustments, with allowance for suspension up-travel and clearance around the pumpkins. The panhard mount on the chassis is made from machined aluminum to withstand the impacts of severe trail conditions. Molded shock towers capture the top of the 90mm Incision Scale Shocks in double sheer for maximum support. The chassis allows clearance for both brushed and brushless 540 motors, and a transmission base spacer is included to provide rear upper link clearance at the motor if needed.
The one-piece aluminum battery and electronics tray hold the electronics low in the chassis and help to maintain a forward weight bias for increased stability and control. Full width aluminum front and rear bumpers are durable and lightened, and when combined with the aluminum rock sliders that capture the sides of the Origin body you have the armor needed for maximum protection. Beyond the aluminum sliders the plastic lower slider plates allow a smooth transition from the skid to the edge of the slider.
The VS4-10 drivetrain is based off our proven parts you already know and trust. The licensed Currie Enterprises RockJock 44 style front axle features an offset front differential housing and uses chromoly VDI universal axle shafts, high-pinion hypoid ring gear, chromoly 6 bolt spool and patent pending one-piece bearing retainers to create an incredibly scale and durable front axle assembly. Integrated inner c-hubs create an unmatched scale look and are strengthened to provide the most durable axle housing possible, with easily replaceable chromoly threaded inserts for the knuckle king pin screws. The rear Currie RockJock 44 style axle features a centered differential housing and equal length chromoly axle shafts, with the same gears and spool found in the front axle.
A machined aluminum 3-gear Vanquish transmission case houses Incision steel gears, and an updated motor plate with integrated standoffs provides a more secure motor mount. A unique slipper eliminator provides a solid mount for the spur gear, and heavy-duty Incision steel center driveshafts are used to transfer the power from the transmission to the axles. The transmission assembly is finished off with a machined aluminum spur gear guard to protect the 32 pitch spur gear and everything around it. When these components are combined, you have the parts you need to build a smooth and durable drivetrain that will stand up against the toughest drivers.
The Origin polycarbonate body offers retro styling with a modern flair. The full polycarbonate interior was designed by Knight Customs with front bucket seats, a detailed dash and large cargo area in the back. The dash attaches to the interior and molded plastic details like steering wheel and gear shifter help bring the interior to life. The detailed front grill assembly is injection molded and features 10mm LED ready headlight buckets, with a scale radiator assembly, fans, and fan shrouds. In addition, the front light buckets can be replaced with optional Vanquish Rigid Industries Q-Series light pods for even more light! The rear light buckets fit 5mm LEDs, so everyone will take notice when you are coming or going. Other scale details like windshield wipers, door handles and fuel filler cap are included to step up the appearance even further. The entire body, interior and mounting holes are all laser cut – so all you need to worry about is paint.
The VS4-10 features Incision 90mm Scale shocks with aluminum threaded bodies, dual X-ring seals, locking preload collars, keyed spring cups, polished steel shock shafts, and machined pistons. The front 3-link with panhard suspension provides scale looks by keeping the servo out of sight, while still providing room for large suspension travel. The suspension pivots on a full set of stainless steel links to keep the weight down low with a smooth transition from the link to the rod ends. All suspension mounts are sized to fit to the rod end pivot ball perfectly and eliminate excess side to side play.
The VS4-10 includes Incision KMC Machete plastic beadlock wheels and Vanquish VXT tires. The wheels are true beadlocks and are compatible with all Incision aluminum hub options. The VXT tires are 4.65" tall and are molded in a soft and sticky natural rubber compound for performance right out of the box. Firm foams are used to provide sidewall support that helps prevent the tire from rolling over, while keeping the tread in contact with the terrain.
VS4-10 Origin Limited is shown with items that are not included with the kit. Please see list of required items.
No electronics are supplied with the VS4-10 Origin Limited.
No Receiver box is included with the VS4-10 Origin Limited kit.
Items and specifications are subject to change.
Assembly Required. Children 14 and under must have adult supervision.
Posted by Unknown on 11th Mar 2019
Awesome kit with beautiful machined parts. The tires on the other hand are not so great. I fought them for 2 hrs trying to mount them on the included rims but no matter what I tried the beads would pop out. I tried trimming the foams and even tried a set of Crawler innovations foams and still could not mount them.
Posted by Daniel on 9th Mar 2019
Starting off I have 2 scx10s loaded with vanquish parts. That being said, if you've built an scx10, you're building a another one, but better. Instructions are easy to read and build is straight forward. Wheels/tires leave a little to be desired. Everthing else is awesome. Hope vanquish can restock a lot of their inventory. Hoping Vanquish will replace the plastic shock towers with aluminum ones. For the money, it's worth it if you're into heavily modding your rigs.
Posted by rob boutilier on 20th Dec 2018
This was a very fun kit to build. No issues with any part of the build or instructions. I highly suggest this kit.
Posted by Axiomatic RC on 5th Aug 2018
Unmatched quality. Immediately impressed as I opened the lid. The aluminum parts are laid out perfectly like anything high end should be. The rig is the ultimate in trail/crawlers!
Posted by Rubisoho on 25th Jul 2018
First I would like to say " Thank You" for designing a crawler using a custom looking Scout International body, "Well Done". The aluminum differentials are stunning nice like I have never seen ! The parts bags of gears and bearings with the design of assembly shows top notch quality. The bumpers and rock sliders are also a very nice design. Stainless steel four link and custom drive shafts are also very good quality and visually a good finish. The tires are very good and sticky and should be bagged when not in use, the beadlock wheels are good but... I would have liked some kind of Aluminum wheel instead as I just spent so much money on this kit. I also would like to have seen a sheet of manufacturer style stickers like Warn, Currie, and other cool 4X4, Rock Crawler, Turn me over if you can't read this, Trail Rated and others. I also like the idea that it's a clear paint yourself body because I don't like pre painted shelf bought looks. Overall I am happy I purchased this kit and hope if the people at Vanquish do it again they will consider another make model and year manufacturer body that is not run of the mill....Rubisoho !!
Posted by Matt L on 19th Jul 2018
If you all know Vanquish and the quality they produce then you know hands down that this is a bad truck. Every bit of this truck is pure awesome and superior quality love my VP stuff VP customer for life